Transferring Data between Commanders (continued)

Receiving the data

This Commander can receive the data of another Sony RM-AV3000T.

To receive all the data from another remote commander

“ALL x” appears on the Mode Display key, and “ALL” appears on the left Label key.

1Follow Steps 1 to 5 on page 53.

2Press the x key.

X : Transfer data

x : Receive data

3Press the ALL key.

ALL

ALL:

All data of the Commander

COMPO: Data of a Component Select button or a Label key

4Press the ENTER key.

During receiving the data, “cccc cccc” flashes. When all the data has been successfully transferred, “ALL” appears on the right Label key.

Notes

•If the Commander is not ready for receiving the data, press the CLEAR key, then press the RETURN key to clear all the learned signals.

•If “NG” appears during data transfer, go back to Step 3 and continue the operation or press COMMANDER OFF to stop the operation. If you continue the operation, you have to set the sending Commander again to send data.

56