Sony RM-AV3000T Continued45, Adding a command that is required when selecting a component

Notes

•If the component code of a non-Sony product has been set for a Component Select button or a Label key, you cannot programme the Power-On function for it.

•Even if you have programmed a signal by “learning” (See “Adding a command that is required when selecting a component”, page

45)or a System Control function (page 38) for a Component Select button or a Label key, you can programme the Power-On function for that button, but it cannot be used. If you clear a “learned” signal or the System Control function from the button or key, you can use the Power-On function.

•You can programme a signal by “learning” (page 45) or a System Control function (page

38)for a Component Select button for which the Power-On function has been programmed. In this case, the Power-On function is overwritten and cannot be used. If you clear the “learned” signal or the System Control function from the button or key, the Power-On function is resumed, and you can use it again.

•You can set the learning function (page 46) or the System Control function (page 31) to the Component Select button or the Label key for which you programmed the Power-on signal. In this case, the Power-on setting is also available and the Power-on signal is output. So check the setting of Power-on signal before setting the learning function or the System Control function.

Adding a command that is required when selecting a component

In addition to the original function of selecting the operating keys and buttons of the desired component, the Component Select button or the Label key can have another remote control signal by “learning.”

For example, if you always have to change input select of the amplifier to CD when listening to the CD player, programme the signal of “changing the amplifier’s input select” to the CD button of this Commander. Then whenever you press the CD button, it automatically works as the original CD Component Select button and changes also the amplifier input select to CD. (In this case, the amplifier should be turned on first.)

Note

Some specific remote control signals may not be learned.

TV	STB	VCR	DVD	CD	AMP	OTHER
	SYSTEM CONTROL				TIMER	COMMANDER	5
	SYSTEM CONTROL				TIMER	OFF	5
1	2	3		MORE

PROGRAM

MENUEXIT

Continued 45