2Press the Mode Display key (SET) twice to display “LIGHT” on one of the Label keys.

3Press the LIGHT key.

“LIGHT” appears on the Mode Display key.

4Press the OFF TIME key.

The display becomes in the setting mode of the Automatic-Off time of the backlight.

5Press the (+) or (–) key to change the Automatic-Off time of the backlight. Then press COMMANDER OFF to decide the Automatic-Off time of the backlight. The display returns to Step 3.

You can adjust from 1 second to 60 seconds.

Each time the (+) key is pressed, the second increases by 1.

Each time the (–) key is pressed, the second decreases by 1.

For example, “20sec” on the Label key means 20 seconds.

Note

When you set the Automatic-Off time of the backlight longer than 10 seconds (factory setting), the battery life may be short.

If you hold COMMANDER OFF pressed for more than 2 seconds

The setting is decided, and the

Commander turns off.

6Press the LEVEL key.

The display becomes in the brightness setting mode. The current setting (BRIGHT or DIM) stays lit. The other flashes.

Continued 75