![](/images/backgrounds/187776/187776-10058x1.png)
Transferring Data between Commanders (continued)
Notes
•If the Commander is not ready for receiving the data, press the CLEAR key, then press the RETURN key to clear the learned signal on all or one of the Component Select buttons.
•If “NG” appears during data transfer, go back to Step 3 and continue the operation or press COMMANDER OFF to stop the operation. If you continue the operation, you have to set the sending Commander again to send data.
5Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF pressed for less than 2 seconds
The Commander returns to the previous setting mode.
You can programme the Channel Macro function of the components of which the first digit of the
8 (TV) or 9 (CABLE).
And you can programme the Channel Macro function for the macro keys (Label keys) when the selected component name is displayed on the Mode Display key in Step 4, page 59.
If you programme the operation of entering the 1, 2 and 3 keys for a macro key (Label key), you can select programme 123 by pressing that single key.
|
|
|
|
|
|
| 2 | |
3 |
|
|
|
|
|
| 6 | |
|
|
|
|
|
|
| ||
5 |
|
|
|
|
|
| 4 | |
TV | STB | VCR | DVD | CD | AMP | OTHER | ||
| ||||||||
| SYSTEM CONTROL | TIMER |
| COMMANDER | 8 | |||
|
| OFF | ||||||
1 |
| 2 | 3 | MORE |
|
| 1 | |
|
|
|
|
| PROGRAM |
| ||
|
| OK |
|
|
|
|
| |
MENU |
|
| EXIT |
|
|
|
|
58