Programming a Frequently Used Key Operation for SYSTEM CONTROL Buttons or Label Keys (continued)

Example: To store the On/Off signal of an air-conditioner to the SYSTEM CONTROL 2 button

1Place the Commander head to head with the remote control of the air-conditioner.

Remote control of your air-conditioner

about 2 – 4 inches (5 – 10 cm) away

RM-AV3000T

2While pressing COMMANDER OFF, press %.

COMMANDER

OFF

“SET” appears on the Mode Display key.

3Press the LEARN key.

LEARN

“LEARN” appears on the Mode Display key.

If a signal has been learned on that button, the display stays lit. If you want to programme on that button, clear the signal first (page 51).

4Press the SYSTEM CONTROL button (in this case, 2).

Or press the MORE button to display the SYSTEM (4-15) Label keys. To change the Label keys press the MORE button repeatedly. Then press the Label key you want to teach.

2

The display for the pressed SYSTEM CONTROL button or Label key appears on the Mode Display key. “LEARN” flashes for 10 seconds, and the Commander enters receiving mode.

50