By setting an offset for the value of auto white balance, you can make the picture warmer or colder.
This setting is done in engineer mode. To change the camcorder to engineer mode, turn the power off, then turn it on again while pressing
down the rotary encoder. | 4 |
| |
To do this setting in user mode, go to MENU SELECT 4 in engineer |
|
mode. |
|
For details on this setting, refer to “maintenance manual.” |
|
3
1,2
5
4
1 Set the camcorder to engineer mode and turn the MENU ON/OFF/ PAGE switch to ON.
(Continued)
Chapter 4 Adjustments and Settings for Recording