2 Open the SHUTTER selector cover, then push the SHUTTER selector from ON to SEL.

4

SHUTTER selector

The current shutter setting appears for about 3 seconds in the setting change and adjustment progress message display area of the viewfinder screen.

E.g.: SS : 1/250 or : CLS : 60.6 Hz

3 Before the message from step 2 disappears, push the SHUTTER selector to SEL again and repeat until the desired mode or speed appears.

Pushing the SHUTTER selector to SEL repeatedly allows you to cycle through the settings of mode and speed preselected on the SHUTTER page of the setup menu.

Note that all modes and all standard-mode speeds listed in the table on page 4-12 are preselected using the SHUTTER page of the setup menu.

For more information about the SHUTTER page, see “Changing the range of choice of shutter mode and speed settings” (page 4-19).

4-16Chapter 4 Adjustments and Settings for Recording