1Tally indicator
Setting the TALLY switch to HIGH or LOW activates this indicator. The indicator lights during recording on the VTR. It also provides the same
2 information as the REC indicator in the viewfinder: it comes on during recording and flashes to indicate a problem.
2DISPLAY switch
This switches the indications on the viewfinder screen on or off. ON: The indications appear on the viewfinder screen.
OFF: The indications do not appear on the viewfinder screen.
Note
When you turn the MENU ON/OFF/PAGE switch to ON, the menu will appear on the viewfinder screen even if the DISPLAY switch is off.
3TALLY switch
This switch controls the tally indicator, setting its brightness (HIGH or LOW) or turning it off.
4DIAG (diagnosis) button
Pressing this button when the VTR is stopped switches the camcorder to the
To exit from the
Refer to “maintenance manual” for more information.
Caution
Do not press the DIAG button when a remote control unit is connected to the REMOTE connector