Displaying the setup menu

Set the MENU ON/OFF/PAGE switch to ON to display the setup menu. The status display along the top and bottom disappears from the viewfinder screen, and the page that was on the screen when the last menu operation ended appears.

When this menu is first used, the lowest-numbered page of the currently selected pages for menu configuration appears. This also occurs if you set the MENU ON/OFF/PAGE switch to ON while holding the MENU

4 CANCEL/PRST/ITEM switch at CANCEL.

Paging through the menu

Push the MENU ON/OFF/PAGE switch from ON to PAGE.

Every time you push this switch to PAGE, the next page of the menu is displayed.

Initial page

 

 

Next page

 

Final page

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Paging through the menu

While a question mark appears at the left of the page title, you can use the rotary encoder as follows to switch pages.

Turning the rotary encoder counterclockwise as seen from the front

of the camera: advances to the next menu page.

Turning the rotary encoder clockwise as seen from the front of the

camera: returns to the previous menu page.

4-44Chapter 4 Adjustments and Settings for Recording