1 Set the MENU ON/OFF/PAGE switch to ON.
The page that was on the screen when the last menu operation ended appears on the viewfinder screen. (When this menu is first used, the
2 Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until the SETUP CARD page shown below appears (or use the rotary encoder).
4
E11*SETUP | CARD |
|
| ||
|
|
|
| ||
pREAD(pCAM) |
| Data read message | |||
WRITE(pCARD) |
|
| |||
ID EDIT |
|
|
| ||
WRITE | PROTECT : | OFF | Data write message | ||
WHITE | DATA | READ: | OFF | ||
| |||||
|
|
|
| ||
|
|
| Setting of card ID | ||
|
|
| |||
|
|
|
| ||
|
|
|
|
PRESS:READ CARD
3
4
SETUP CARD page (factory settings)
If no card is inserted, the message “CARD NOT INSERTED!” message appears. Close the menu and insert a card.
Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM until the cursor reaches the READ (→ CAM) position (or use the rotary encoder).
Press the rotary encoder.
A message asking whether or not data and the card ID of the camera are to be read from the card appears.
Chapter 4 Adjustments and Settings for Recording