3 Set the
4 If you are using the
DF: Drop frame mode
NDF:
5 Using the SHIFT and ADVANCE buttons, set the time code. SHIFT: Selects a digit to set. Each time you press it, the flashing
4 column moves to the right one digit.
Pressing this button while holding down the HOLD button moves the flashing digit one to the left.
ADVANCE: Increments the flashing digit.
Pressing this button while holding down the HOLD button decrements the flashing digit.
6 Set the
Notes
•The time code continues to advance when Loop Rec mode is turned on, even when the system is set to
•When you turn on the Loop Rec function, make sure either the mode is set to
The Loop Rec function is provided by the optional