Black balance memory
Values stored in memory are held until the black balance is next adjusted.
If a memory error occurs
If the error message “: STORED DATA : NG” flashes on the viewfinder screen when the camcorder is turned on, the black balance memory content has been lost.
Adjust the black balance again. Contact your Sony representative if this
message continues to appear even after the black balance has been4 adjusted again.
For more information, refer to “maintenance manual.”
Follow the procedure below to automatically adjust the white balance.
1 Set the switches as follows:
GAIN: Set as low as possible.
OUTPUT/DCC: CAM
WHITE BAL: A or Ba)
a) When “WHITE B” in the
OPERATION MODE page of the menu is set to “AWB”.
(Continued)
Chapter 4 Adjustments and Settings for Recording |