Adjustment Progress Messages
You can limit or suppress the messages that give details of setting changes and adjustment progress and results by setting a display mode. The conditions under which messages are displayed and their correspondence with the display mode are as follows:
Setting change and adjustment progress messages and display modes
| Y: Message is displayed. | 4 | |||
|
|
| |||
| N: Message is not displayed. |
| |||
Message display | Message | Display mode | |||
condition |
| setting |
|
|
|
|
|
|
|
|
|
|
| 1 | 2 | 3 |
|
|
|
|
|
|
|
When the filter selection | FILTER : n (where n = 1, 2, 3, | N | N | Y | |
has been changed | 4) |
|
|
|
|
When the gain setting | GAIN : n (where n = | N | N | Y | |
has been changed | 0dB, 3dB, 6dB, 9dB,12dB, |
|
|
|
|
| 18dB, 24dB, 30dB, 36dB, |
|
|
|
|
| 42dB, 48dB) |
|
|
|
|
|
|
|
|
|
|
When the setting of the | WHITE : n (where n = A CH, | N | N | Y | |
WHITE BAL switch has | B CH, PRST) or ATW : RUN |
|
|
|
|
been changed |
|
|
|
|
|
|
|
|
|
|
|
When the OUTPUT/ | DCC : ON (or OFF) | N | Y | Y | |
DCC selector has been |
|
|
|
|
|
set to DCC ON or OFF |
|
|
|
|
|
|
|
|
|
|
|
(Continued)
Chapter 4 Adjustments and Settings for Recording