2 Press the MENU CANCEL/PRST/ITEM switch to CANCEL/PRST.

The character below the character position cursor disappears, and is replaced by a space (s).

3 (1) To delete another character, press the rotary encoder repeatedly until the cursor is at the position of the character to be deleted.

(2) Return to step 2 to delete the character.

4

4-8-7 Displaying Time Code and Other Information

In the setup menu OPERATION 2 page, you can select information to be displayed in the viewfinder and output from the TEST OUT connector. Use the following procedure.

1,2,5

4

3

Settings to select whether or not to display or output time code and so forth

1 Set the MENU ON/OFF/PAGE switch to ON.

The last page accessed appears in the viewfinder display. When this menu is first used, the lowest-numbered on of the currently selected pages appears.

(Continued)

Chapter 4 Adjustments and Settings for Recording 4-73