If there is a malfunction, the display shows a code of two numbers and a message. You can check the condition of the system by the message. Refer to the following table to solve the problem. If any problem persists, consult your nearest Sony dealer.
PROTECTOR
Irregular current is being output from the speakers, or the upper panel of the receiver is covered with something. The receiver will automatically turn off after a few seconds. Check the speaker connection and turn on the power again.
Reference sections for clearing the memoryTo clear | See |
All memorized settings | page 36 |
|
|
Customized sound fields | page 76 |
|
|
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode1) 2) (8 ohms 1 kHz, THD 0.7%):
105 W + 105 W Rated Power Output at Stereo Mode2)
(4 ohms 1 kHz, THD 0.7%):
105 W + 105 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz,
THD 0.09%) FRONT2):
100 W + 100 W CENTER2):
100 W SURROUND2):
100 W + 100 W SURROUND BACK2): 100 W + 100 W
Reference Power Output
(4 ohms 20 Hz – 20 kHz,
THD 0.15%) FRONT2):
100 W + 100 W CENTER2):
100 W SURROUND2):
100 W + 100 W SURROUND BACK2): 100 W + 100 W
Reference Power Output at Stereo Mode1) 2) (8 ohms 1 kHz, THD 10%):
130 W + 130 W
Reference Power Output at Stereo Mode2) (4 ohms 1 kHz, THD 10%):
130 W + 130 W
Information Additional
continued
105GB