Listening to the sound without any adjustment

(ANALOG DIRECT)

You can switch the audio of the selected input to 2 channel analog input. This function enables you to enjoy high quality analog sources.

When using this function, only the volume and front speaker balance can be adjusted.

A.DIRECT

Press A.DIRECT.

Analog audio is output. ANALOG DIRECT function is toggled between on and off as you press A.DIRECT.

To enjoy the analog sound source with noise free performance

(Analog pureness control)

The Analog pureness control function bypasses the video and digital circuits that are not in use, and shuts down the power while the analog source is being played back. Thus, the Analog pureness control function provides noise-free audio performance and delivers high sound quality.

The Analog pureness control function is activated when you select an input source with no video input, then select “ANALOG” from INPUT MODE, and you press ANALOG DIRECT.

Adjusting the speaker levels and balance

(TEST TONE)

You can adjust the speaker levels and balance while listening the test tone from your listening position.

Tip

The receiver employs a test tone with a frequency centered at 800 Hz.

1

3

2,

5-11

12

 

 

4

1 Turn on the receiver and TV.

2 Press ON SCREEN.

Switch the input of the TV so that the setting menu is displayed on the TV screen connected to this receiver.

3 Press RECEIVER.

Receiver operation is enabled.

4 Press MENU.

The list of setting menus appears.

74GB