Using only the front speakers(2CH STEREO)

In this mode, the receiver outputs the sound from the front left/right speakers only. There is no sound from the sub woofer.

Standard 2 channel stereo sources completely bypass the sound field processing and multi- channel surround formats are downmixed to 2 channel.

2CH

Press 2CH.

Note

No sound is output from the sub woofer in the 2CH STEREO mode. To listen to 2 channel stereo sources using the front left/right speakers and a sub woofer, select “A.F.D. AUTO.”

This receiver will generate a low frequency signal for output to the sub woofer when there is no L.F.E. signal, which is a low-pass sound effect output from a sub woofer to a 2 channel signal.

Enjoying the surround effect at low volume levels(NIGHT MODE)

This function allows you to retain a theater like environment at low volume levels. This function can be used with other sound fields. When watching a movie late at night, you will be able to hear the dialog clearly even at a low volume level.

NIGHT

MODE

Press NIGHT MODE.

The NIGHT MODE function is activated. The NIGHT MODE is toggled between on and off as you press NIGHT MODE.

Notes

•This function does not work in following cases.

– MULTI IN is selected

•If you set the NIGHT MODE to on during DTS 96/ 24 signal reception, it will play back only at 48 kHz.

Tip

While this function is on, the BASS, TREBLE, and EFFECT levels increase, and “D.RANGE COMP.” is automatically set to “MAX” (page 57).

Sound Surround Enjoying

73GB