5 Press V/v repeatedly to select “Level Settings,” then press to enter.

6 Press V/v repeatedly to select “TEST TONE,” then press .

7 Press V.

The test tone is output from each speaker in sequence.

Also, if you press v, the pattern will become the “FIX” pattern in which the test tone is output from the selected speaker only.

8 Press to enter.

9 Adjust the speaker level and balance using the Level Settings menu so that the level of the test tone sounds the same from each speaker.

For details on the Level Settings menu, see page 56.

Tips

•To adjust the level of all speakers at the same time, press MASTER VOL +/–.

•The adjusted value is shown on the display during adjustment.

10Press V/v repeatedly to select “TEST TONE,” then press .

11Press v to select “OFF,” then press .

The test tone turns off.

12Press ON SCREEN.

The menu setting display disappears.

When a test tone is not output from the speakers

•The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly.

•The speaker cords may have the short-circuit problem.

When a test tone is output from a different speaker than the speaker displayed screen

The location where you set up the speaker (for example, the front speaker position) and type of the speaker terminal you connected (for example, the surround back speaker terminal) are different. Check the speaker allocation.

For more precise adjustment

You can output the test tone or sound source from two adjacent speakers to adjust their balance and level.

Then select the two speakers you want to adjust by selecting “PHASE NOISE” or “PHASE AUDIO” in step 6.

Sound Surround Enjoying

75GB