Press D.TUNING.

Direct tuning

Enter the frequency of a station directly by using the numeric buttons.

1

3

2 4

Storing FM stations automatically

(AUTOBETICAL)

This function lets you store up to 30 FM and FM RDS stations without redundancy. Additionally, it only stores the stations with the clearest signals.

If you want to store FM or AM stations one by one, see “Presetting radio stations” (page 79).

1,2 2

1 Press TUNER repeatedly to select the FM or AM band.

2

3 Press the numeric buttons to enter the frequency.

Example 1: FM 102.50 MHz

Select 1 b 0 b 2 b 5 b 0

Example 2: AM 1,350 kHz

Select 1 b 3 b 5 b 0

4 Press ENTER.

Tip

If you have tuned in an AM station, adjust the direction of the AM loop antenna (aerial) for optimum reception.

If you cannot tune in a station and the entered numbers flash

Make sure you have entered the right frequency. If not, repeat steps 2 to 4. If you still cannot tune in a station, the frequency is not used in your area.

1 Press POWER to turn off the receiver.

78GB