Example: Adjust the distance C to 1.5 meters or more when the distance A is 6 meters.
This is important because incorrect speaker placement is not conductive to the enjoyment of surround sound. Place note that placing the speakers closer than the required will cause a delay in the output of the sound from that speaker. In other words, the speaker will sound like it is farther away.
xDISTANCE UNIT (Distance unit)
Lets you select the unit of measure for setting distances.
• feet
The distance is displayed in feet.
• meter
The distance is displayed in meters.
xSP POSI.
(Surround speaker position)
Lets you specify the location of your surround speakers for proper implementation of the surround effects in the Cinema Studio EX modes (page 72). This setup item is not available when the surround speakers are set to “NO” (page 64).
•SIDE/LOW
Select if the location of your surround speakers corresponds to sections A and C.
•SIDE/HIGH
Select if the location of your surround speakers corresponds to sections A and D.
•BEHD/LOW
Select if the location of your surround speakers corresponds to sections B and C.
•BEHD/HIGH
Select if the location of your surround speakers corresponds to sections B and D.
66GB