Notes on converting video signals
•You cannot
S video signals, and video signals.
•When video or S video signals from a VCR, etc., are converted on this receiver and then output to your TV, depending on the status of the video signal output, the image on the TV screen may appear distorted horizontally or no image may be output.
•The converted video signals are output only from the MONITOR OUT jacks. They are not output from VIDEO OUT jacks or
S VIDEO OUT jacks.
•When you play a VCR with an image improvement circuit, such as TBC, the images may be distorted or may not be output. In this case, set the image improvement circuit function to off.
•The video conversion function does not work with SECAM video signals.
When the receiver receives video output signals that are
When recording, connect the recording component to the VIDEO OUT jacks or S VIDEO OUT jacks of the receiver. Connect cords for input and output signals to the same type of jack, as VIDEO OUT jacks and S VIDEO OUT jacks do not have an up- conversion function.
Note
Signals output from the MONITOR OUT jacks may not be recorded properly.
34GB