Tuner Operations

Listening to FM/AM radio

You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas (aerials) to the receiver (page 35).

Tip

The tuning scale for direct tuning is shown below.

• FM band

50 kHz

• AM band

9 kHz

Automatic tuning

1

2

1 Press TUNER repeatedly to select the FM or AM band.

2 Press TUNING +/–.

Press TUNING + to scan from low to high, press TUNING – to scan from high to low.

The receiver stops scanning whenever a station is received.

In case of poor FM stereo reception

If the FM stereo reception is poor and “STEREO” flashes on the display, select monaural audio so that the sound will be less distorted.

Select “MONO” in “FM MODE” selection in

the Tuner Settings menu.Tuner Operations

77GB