Notes

Sound adjustments do not affect the signal output from the TAPE/CDR OUT or MD/DAT OUT jacks.

The audio signals input to the MULTI CHANNEL INPUT jacks are output only from the front left/ right channels.

To record digital sound

Connect a component for playback to the digital audio input (OPTICAL IN) jack, and connect the recording component to the OPTICAL MD/DAT OUT jack.

Recording onto recording media

1 Press the input button of the playback component.

You can also use INPUT SELECTOR on the receiver.

2 Prepare the component for playing.

For example, insert the video tape you want to copy into the VCR.

3 Prepare the recording component.

Insert a blank video tape, etc. into the recording component (VIDEO 1 or VIDEO 2) for recording.

4 Start recording on the recording component, then start playback on the playback component.

Notes

Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the sources.

The audio signals input to the MULTI CHANNEL INPUT jacks are output only from the front left/ right channels.

Using a bi-amplifier connection

If you are not using surround back speakers, you can use the SURROUND BACK SPEAKERS terminals for the front speakers for use with a bi-amplifier connection.

To connect speakers

Front speaker

Frontspeaker

(R)

(L)

Hi

Hi

Lo

Lo

Operations Other

Connect the jacks on the Lo (or Hi) side of the front speakers to the FRONT SPEAKERS A jacks, and connect the jacks on the Hi (or Lo) side of the front speakers to the SURROUND BACK SPEAKERS terminals. Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers. Not doing so may cause a malfunction of the receiver.

To set up speakers

Set “SUR BACK SP” to “BI-AMP” in the Speaker Settings menu (page 63). The same signals output from the FRONT SPEAKERS A terminals can be output from the SURROUND BACK SPEAKERS terminals.

continued

91GB