Listening to the sound in
another room
?/1
g 
2ND ZONE OUT
AUDIO IN 
Stereo amplifier
SPEAKERS
Press 2ND ZONE repeatedly to select the analog audio signals for output to a stereo amplifier in another room. For details on the connection, see page 15.
Each time you press the button, the audio source changes cyclically as follows:
SOURCE*1 tMD/TAPE tCD/SACD t
TUNER
*1 The audio signals of the current INPUT SELECTOR is output.
•Even if 2ND ZONE is set to “SOURCE”, the sound from front speakers is not output when MULTI CH IN/DIRECT is set to MULTI 1 or 2
DIRECT.
•Only signals from components connected to the analog input jacks are output through the 2ND ZONE OUT jacks. No signals are output from components connected to only the digital input jacks.
Changing the display
DIMMER
Press DIMMER repeatedly to adjust the brightness of the display (3 steps).
DISPLAY
Each time you press DISPLAY, the display changes cyclically as follows:
Index name of the component* tSelected component tSound field applied to the program source
When the tuner is selected
Index name of the preset station* t Frequency tSound field applied to the band or the preset station
*Index name appears only when you have assigned one to the component or preset station (page 40). Index name does not appear when only blank spaces have been entered, or it is the same as the
INPUT SELECTOR.
Operations Basic