Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than
0.09% total harmonic distortion from 250 milliwatts to rated output (Models of area code U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode (8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT1): | 100 W/ch |
CENTER1): | 100 W |
SURR1): | 100 W/ch |
SURR BACK1): | 100 W/ch3) or 100 W4) |
(8 ohms 1 kHz, THD 0.7 %) | |
FRONT1): | 110 W/ch |
CENTER1): | 110 W |
SURR1): | 110 W/ch |
SURR BACK1): | 110 W/ch3) or 110 W4) |
Models of area code E2/E3, MX Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)
110 W + 110 W2)
Reference Power Output2) (8 ohms 1 kHz, THD 10 %)
FRONT1): | 130 W/ch |
CENTER1): | 130 W |
SURR1): | 130 W/ch |
SURR BACK1): | 130 W/ch3) or 130 W4) |
1)Depending on the sound field settings and the source, there may be no sound output.
2)Measured under the following conditions:
| Area code | Power requirements |
| E2/E3 | 240 V AC, 50 Hz |
|
|
|
3) |
| |
4) |
| |
Frequency response |
| |
|
| |
PHONO | RIAA equalization curve | |
|
| ±0.5 dB |
|
| |
MULTI CH IN (1, 2), | 10 Hz – 70 kHz | |
CD/SACD, TV/SAT, | ||
MD/TAPE, DVD, | field and equalizer | |
VIDEO 1, 2, 3 | bypassed) | |
|
| |
Inputs (Analog) |
| |
PHONO | Sensitivity: 8 mV | |
|
| Impedance: 50 kilohms |
|
| S/N5): 86 dB (A, 8 mV6)) |
MULTI CH IN (1, 2), | Sensitivity: 500 mV | |
CD/SACD, TV/SAT, | Impedance: 50 kilohms | |
MD/TAPE, DVD, | S/N5): 96 dB | |
VIDEO 1, 2, 3 | (A, 500 mV6)) | |
5)INPUT SHORT (with sound field and equalizer bypassed).
6)Weighted network, input level.
Inputs (Digital)
DVD (Coaxial) | Sensitivity: – |
| Impedance: 75 ohms |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
TV/SAT, CD/SACD, | Sensitivity: – |
MD/TAPE, VIDEO 3 | Impedance: – |
(Optical) | S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
Outputs (Analog) |
|
MD/TAPE (OUT), | Voltage: 500 mV |
VIDEO 1, 2 | Impedance: 10 kilohms |
(AUDIO OUT) |
|
|
|
SUB WOOFER | Voltage: 2 V |
| Impedance: 1 kilohms |
|
|
Outputs (Digital) |
|
MD/TAPE (Optical) | Sensitivity: – |
|
|
EQUALIZER |
|
Gain levels: | ±10 dB, 0.5 dB step |