![](/images/backgrounds/17134/17134-7639x1.png)
Tuning to preset stations
You can tune the preset stations by either of the following two ways.
Scanning the preset stations
1 Turn INPUT SELECTOR to select the FM or AM band.
The last received station is tuned in.
2 Press PRESET TUNING + or PRESET
TUNING – repeatedly to select the preset station you want.
Each time you press the button, the receiver tunes in one preset station at a time, in the corresponding order and direction as follows:
nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N
nC0˜...C2˜C1N
Using the preset codes
Use the supplied remote to perform the following operations. For details on the buttons used in this section, see pages
1 Press TUNER on the remote.
The last received station is tuned in.
2 Press SHIFT to select a memory page (A, B, or C), then press the preset number of the station you want using the numeric buttons.
Broadcasts Receiving