Remote button description (continued)
Remote | Operations | Function |
Button |
|
|
|
|
|
MD/TAPE | Receiver | To listen to Minidisc or |
|
| audio tape. |
|
|
|
AUX | Receiver | To listen to an audio |
|
| equipment. |
|
|
|
Remote | Operations | Function |
Button |
|
|
|
|
|
TAPE | Receiver | To listen to audio tape. |
|
|
|
MD/DAT | Receiver | To listen to Minidisc |
|
| or DAT deck. |
|
|
|
2ND | Remote | Select the command |
|
| mode of the remote. |
|
|
|
M1 and | Remote | To perform several |
M2 |
| commands in sequence |
|
| automatically. |
|
|
|
Notes
•Some functions explained in this section may not work depending on the model of the receiver.
•The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described.
•To activate the buttons with orange printing, press ALT first before pressing the buttons.
•Press MAIN MENU on the remote before you use the V/v/B/b buttons for receiver operation.
•Press TOP MENU/GUIDE or AV MENU on the remote before you use the remote to control the satellite tuner, VCR and DVD player.
•
–
•
–
–
Selecting the command
mode of the remote
Set the remote command mode using the USE MODE button and the remote command mode buttons.
Selecting the command mode
You can switch the command mode (AV1 or AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver.
Press AV1 or AV2 while pressing down
USE MODE.
The indicator lights once (twice for AV2) , then the command mode switches.
To check the command mode of the remote
Press USE MODE. You can check the remote by the indicator.
Mode | Indicator lights |
AV1once
AV2twice
To reset the remote to factory settings
Press =/1, AV =/1, and MASTER VOL – at the same time.
The indicator lights 3 times, then goes off.