FM tuner section
Tuning range | 87.5 - 108.0 MHz |
Antenna terminals | 75 ohms, unbalanced |
Intermediate frequency | |
| 10.7 MHz |
Sensitivity |
|
Mono: | 18.3 dBf, 2.2 µV/75 ohms |
Stereo: | 38.3 dBf, 22.5 µV/75 ohms |
Usable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono: | 76 dB |
Stereo: | 70 dB |
Harmonic distortion at 1 kHz | |
Mono: | 0.3% |
Stereo: | 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
| |
Selectivity | 60 dB at 400 kHz |
AM tuner section
Tuning range |
|
|
Models of area code U, CA |
| |
With | 1710 kHz7) | |
With | 531 – | 1710 kHz7) |
Models of area code E2/E3 |
| |
With | 1610 kHz7) | |
With | 531 – | 1602 kHz7) |
Models of area code MX |
| |
With | 1610 kHz | |
Antenna | Loop antenna | |
Intermediate frequency |
| |
| 450 kHz | |
Usable sensitivity | 50 dB/m (at 1,000 kHz or | |
| 999 kHz) | |
S/N | 54 dB (at 50 mV/m) | |
Harmonic distortion | 0.5 % (50 mV/m, 400 Hz) | |
Selectivity |
|
|
At 9 kHz: | 35 dB |
|
At 10 kHz: | 40 dB |
|
7)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down PRESET TUNING + and press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs |
|
Video: | 1 |
Y: 1 | |
Component Video: | C: 0.286 |
| |
Y: | 1 |
0.7 | |
0.7 | |
Outputs |
|
Video: | 1 |
Y: 1 | |
Component Video: | C: 0.286 |
| |
Y: | 1 |
0.7 | |
0.7 |
General
Power requirements
Area code | Power requirements |
U, CA, MX | 120 V AC, 60 Hz |
|
|
E2/E3 | 120/220/240 V AC, 50/60 Hz |
| |
Power consumption | |
Area code | Power consumption |
|
|
U | |
| |
|
|
CA | |
| |
|
|
MX, E2/E3 | |
|
|
Power consumption (during standby mode)
0.3W (when “POWER SAVE” in the CUSTOMIZE menu is set to “ON”) (page 42).
continued
Information Additional