DIGITAL ASSIGN?
* STR-DE995 only.
depends on the digital input
OSD V.POSI [XX]*
4
OSD H.POSI [XX]*
4
POWER SAVE [XXX]
OFF
DECODE [XXXX]
PCM (for DVD, CD/SACD, MD/TAPE), AUTO (for VIDEO 2)
SB DEC [XXXXXX]
AUTO
Parameter
Initial setting
Adjustments using the
CUSTOMIZE menu
The CUSTOMIZE menu allows you to make the following adjustments.
1 Press MAIN MENU repeatedly to select “ CUSTOMIZE ”.
2 Turn MENU (STR-DE995 only) or press / (STR-DE895 only) to select the
parameter you want to adjust.
Certain setup parameters may be dimmed in the display. This means that the selected parameter is either unavailale or fixed and unchangeable due to sound field (pages 28–32) or other settings.
3 Turn the +/– (STR-DE995 only) or jog dial (STR-DE895 only) to select the setting you want.
The setting is entered automatically except for the setting of “DIGITAL ASSIGN?”.
4 Press ENTER if you select the setting for “DIGITAL ASSIGN?”.
5 Repeat steps 2 and 3 until you have set all of the parameters that follow.
Initial settings

xSurround back decoding mode (SB DEC [XXXXXX])

You can also set this parameter using SURR BACK DECODING on the front panel. For details, see page 31.

xDecode priority (DECODE [XXXX])

Sets the appropriate decoding for incoming digital signals.

• PCM priority mode (DECODE [PCM])

Use to enjoy playback from audio CD (PCM), DVD and MD. When used with media other than CD, DVD or MD, you may experience noise and “DECODE ERROR” appears in the display. If this happens, switch to AUTO mode.

•AUTO mode (DECODE [AUTO])

Use to enjoy playback from audio CD (PCM), DVD, DTS-CD and DTS-LD sources. However, with audio CDs, you may not be able to listen the very first moments of each track.

Normally, use as-is with the initial settings above.

xCONTROL A1 power save function (POWER SAVE [XXX])

When set to “OFF”, you can turn on the receiver automatically when the component connected via monaural miniplug cord (see page 14) is turned on and the playback is started. However, the receiver will not be turned on automatically if set to “ON”.

When set to “ON”, you can save the power consumption of the receiver during standby mode.

42GB