Location of Parts

This chapter provides information about the location and function of the buttons and controls on the front panel and supplied remote.

Front Panel Parts

Description

1?/1 switch

Press to turn the receiver on and off.

To avoid damaging your speakers, be sure to rotate the VOLUME control counterclockwise immediately after you turn on the receiver.

STANDBY indicator

Lights up when the receiver is turned off.

2Remote sensor

When using the supplied remote, point it towards this sensor ( ).

3SLEEP indicator

Lights up when the Sleep Timer function is activated (page 24).

4H.A.T.S. indicator

Lights up during H.A.T.S. (High-quality digital Audio Transmission System) function is activated (page 25).

5DISPLAY button

Press repeatedly to change the information in the display window as follows:

v

Index name of the component1)

v

Model name of the component2)

When the built-in tuner is selected

v

Index name of the preset station1) or program station name3)

v

Frequency

1)An index name appears only if one has been assigned to the selected component or preset station (page 22).

2)If the model name isn’t known, the category of the component appears (e.g., “CD” or “MD”). If the category isn’t known, “Unknown” appears.

3)Appears only during RDS reception (page 18).

When you press the DISPLAY button while the Ping function is on, “N N n n” appears for a few seconds in the display of the currently selected component (page 25).

10GB