Display Messages
The following table explains the various messages that appear in the display.
Message | Error code(s) | Cause and/or remedy |
CANNOT LINC | C78:11/C78:12 | The receiver can’t establish a LINC with a component because of an existing LINC between |
|
| the receiver and another component. Cancel the LINC between the receiver and the other |
|
| component. |
|
|
|
NO SIGNAL | C78:04 | No signal is output from the selected component. Verify that the signal is output from the |
|
| component (e.g., by recording from the component). |
|
|
|
| C78:22 | The format of the input signal is not supported. |
|
|
|
| C78:31 | The communication between the receiver and the selected component is unstable. Or, the |
|
| format of the input signal is not supported. Check the condition and the signal format of |
|
| the selected component. |
|
|
|
BUS FULL | C78:15 | The signal bus within the i.LINK configuration is full and no more signals can be output |
|
| from the receiver. Cancel the LINC between the component and the receiver. |
|
|
|
LOOP CONNECT | C78:03 | The i.LINK connection is looped. Check the connection (see page 26). |
|
|
|
NEW CONNECT | — | An i.LINK component has been connected to or disconnected from the i.LINK |
|
| configuration. Wait several seconds for the indication to turn off. |
|
|
|
FUNC. Locked | — | You can’t select a component because the LINC between the other component and the |
|
| receiver is currently established. Cancel the LINC between the other component and the |
|
| receiver. |
|
|
|
Select FUNC. | — | Select another component. |
|
|
|
Input Occupied |
| Cancel the LINC between the other component and the receiver. |
|
|
|
Off Processing | — | While the i.LINK Control function is activated, the corresponding i.LINK component turns |
|
| off automatically when you turn off the receiver. However, it may take a while for the |
|
| component to turn off and no operations are possible on the receiver while this indication |
|
| is flashing. Wait several seconds for the indication to turn off. |
|
|
|
Information Additional