Operations Other
Naming Preset Stations and Program Sources
You can enter a name of up to eight characters for preset stations (excluding RDS stations) and up to 11 characters for program sources (for up to 10 i.LINK components).
These names (for example, “LISSA CD”) appear in the receiver’s display when a station or program source is selected.
Note that no more than one name can be entered for each preset station or program source.
This function is useful for distinguishing components of the same kind. For example, two CD players can be specified as “CD 1” and “CD 2”, respectively.
1Press JOG MENU repeatedly until a component name appears in the display.
2To index a preset station
Rotate the jog dial until “TUNER” appears in the display.
The last received station is tuned in.
To index a program source
Rotate the jog dial to select the program source (component) to be named, then go to step 4.
3Tune to the preset station you want to create an index name for.
If you aren’t familiar with how to tune to preset stations, see “Tuning to preset stations” on page 20.
4Press JOG MENU repeatedly until “Setup Menu” appears in the display.
5Rotate the jog dial until “Name Input” appears in the display, and press ENTER.
6Create an index name by using the jog dial, <, and >.
Rotate the jog dial to select a character, then press > to move the cursor to the next position.
To select the character type
Press DISPLAY repeatedly until the character type you want appears in the display.
To insert a space
Rotate the jog dial until a blank space appears in the display (the space character is between “]” and “A”).
To reenter a character
Press < or > repeatedly until the character to be changed flashes, then rotate the jog dial to select a character.
If you attempt to name an i.LINK component after you’ve already named 10 i.LINK components
“List Full” appears in the display. To continue, erase unwanted index name(s).
7Press ENTER.
“MEMORY” lights up in the display for about one second and the index name is entered.
To assign index names to other stations
Repeat steps 2 to 7.
Notes
•You can’t create index names for RDS stations and the component connected to the ANALOG IN connectors. “Not In Use” appears in step 5 at this time.
•You can name only the preset station currently being tuned to or the program source currently being selected. You can’t name stations which are not preset.
To erase an index name
1Press JOG MENU repeatedly until “Setup Menu” appears in the display.
2Rotate the jog dial until “Name Erase” appears in the display, and press ENTER.
3Rotate the jog dial to select the index name you want to erase.
4Press ENTER.
Selected index name is erased.
Note
You can erase index names only for i.LINK components using this procedure.