
Sound the Adjusting
Setting Sound Parameters
5Press ENTER and rotate the jog dial to set the selected parameter.
Each parameter can be set in a range of
6If you want to set other parameters, repeat steps 4 and 5.
zYou can use the remote to adjust the tone parameters
Press
Checking the parametric equalizer
settings (Parametric EQ1 to 3)
1Do steps 1 to 3 in “Selecting an equalizer setting” on page 15 to select the parametric equalizer setting to be checked.
The settings can be checked for the patterns stored in Parametric EQ1 to 3 only.
2Press JOG MENU repeatedly until “Sound Menu” appears in the display.
3Rotate the jog dial until “EQ Condition” appears in the display.
“EQ Condition” doesn’t appear if a pattern in EQ1 to 5 or EQ FLAT has been selected.
4Press ENTER and rotate the jog dial to select the parameter to be checked.
One of the nine parameters appears in the display. Rotate the jog dial to display next parameter.
The normal display will reappear after several seconds.
Storing adjusted parameters
1Do steps 1 to 6 in “Setting the equalizer parameters” on page 15 and this page to adjust the parameter(s).
2Press JOG MENU repeatedly until “Sound Menu” appears in the display.
3Rotate the jog dial until “EQ Memory” appears in the display, then press ENTER again.
“Memory to EQX?” appears in the display. “X,” which appears as a number from 1 to 5, is the number of the currently selected preset pattern in EQ BANK submenu.
4Press ENTER to overwrite the parameter(s) of current preset setting with new parameter(s). If you don’t want to overwrite the parameters, rotate the jog dial to select the number of a preset setting where the adjusted parameter(s) is (are) to be stored, then press ENTER.
“Memorized EQX” appears for a few seconds, and then the normal display reappears. “X” is the number of the setting selected to store the parameter(s).
zYou can reset the contents of the preset equalizing patterns to their factory settings
See page 25.
Adjusting the speaker balance
1Press JOG MENU repeatedly until “Sound Menu” appears in the display.
2Rotate the jog dial until “SP. Balance” appears in the display, then press ENTER.
3Rotate the jog dial to adjust the speaker balance.