Sony TCD-D8 operating instructions 10EN, Other operations, Tips, Press

5

PAUSE

REC/ID WRITE

REC MUTE

Press the REC and PAUSE P buttons.

The tape-corder enters the pause mode. When the REC button only is pressed, the tape-corder enters the recording monitor mode (see page 18) and does not begin recording.

6

PLAY

PAUSE

or

Press either the PLAY ( or PAUSE Pbutton.

The recording begins.

10EN

Tips

•To begin recording immediately, press the PLAY (button while pressing the REC button in the stop or playback mode.

•The input source is displayed when the source is changed during recording, monitoring, or in the recording pause mode.

•The sampling frequency is displayed when the sampling frequency is changed during recording.

Notes

•Changing the sampling frequency while recording may cause temporary sound dropout to be recorded.

•Connecting or disconnecting the plug from the PHONES/ LINE OUT jack while recording may cause noise to be recorded.

•Noise may be recorded when the display light is turned on while recording. In this case, turn it off.

Recording

Other operations

To	Press
Stop recording	STOP p
Pause recording	PAUSE P
Release pause	PAUSE P or PLAY (
Check the input source
in the stop mode	REC twice
in the recording pause	REC
mode	Press the button until the
	following display appears.

Check the sampling	PLAY ( in the recording
frequency	mode
	The following display
	appears while the button is
	pressed.