(Recording
Connecting with Other Equipment for Recording
You can connect the
Note
When recording from analog audio equipment, disconnect the microphone from the
Otherwise, the sound from the microphone is recorded.
Notes
• If “ | ” |
is displayed, the source | |
cannot be recorded. |
|
(See page 30.) |
|
• Make sure to set the |
|
switch of the |
|
connecting cable to |
|
DIGITAL before |
|
recording. The input |
|
remains as analog input | |
Recording from analog audio equipment (Analog connection)
Audio connecting cable (not supplied)
| Stereo unit |
| or radio |
| cassette- |
To LINE IN | corder, etc. |
| To LINE OUT |
1
2
3 Press either the PLAY ( or PAUSE P button to begin recording. Then, begin playback of the connected source.
Recording from audio equipment with digital output (Digital connection)
Recording
even if the switch is set |
to DIGITAL while |
recording. |
Switch
Optical cable (not supplied)
To(OPTICAL) digital output
Tips
When connecting with an audio equipment with digital output, note the followings:
• Setting of the recording |
mode is not required. |
To REMOTE DIGITALI/O
or
Coaxial cable (not supplied)
CD player, BS tuner, DAT deck, etc.
To (COAXIAL) digital output
• The recording level is |
set automatically to the |
level of the source. It is |
impossible to adjust it |
with this |
manually. |
1 Use and connect the optical cable or coaxial cable according to the digital output jack of the connected equipment.
2 Set the switch of the connecting cable to DIGITAL. 3 Press the REC and PAUSE P buttons.
4 Press either the PLAY ( or PAUSE P button to begin recording. Then, begin playback of the connected source.
Recording
