Before operation
•Insert a tape for recording into your camcorder.
•Insert a “Memory Stick” containing still images into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) In the standby mode, press MEMORY MIX.
The first recorded image appears in the
(3) Press MEMORY+/– to select the still image you want to superimpose.
–: To see the previous image + : To see the next image
(4) Turn the SEL/PUSH EXEC dial to select the desired mode. The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM y M. OVERLAP (5) Press the SEL/PUSH EXEC dial.
The still image overlaps with the picture on the screen. (6) Turn the SEL/PUSH EXEC dial to adjust the effect.
M. CHROM – The degree of the blue areas in the still image which is to be swapped with a moving picture
M. LUMI – The brightness of the area in the still image which is to be swapped with a moving picture
C. CHROM – The degree of the blue areas in the moving picture which is to be swapped with a still image
M. OVERLAP – No adjustment necessary
The fewer bars there are on the screen, the stronger the effect becomes.
(7) Press START/STOP to start recording.
2 |
| START/STOP |
|
|
|
| |
MEMORY |
|
|
|
MIX |
| 4 |
|
|
| M. LUMI | |
M. CHROM |
|
| 101 |
|
|
| |
|
|
| |
101 |
| 5 | M. LUMI I I I • • • • |
| |||
Still image |
|
| 101 |
| 3 |
| |
| 6 | M. LUMI I • • • • • • | |
|
| ||
|
|
| 101 |
|
|
|
Recording – Operations ”Stick Memory“
141