Capturing images from an analog video unit on your computer – Signal convert function
You can capture images and sound from an analog video unit on your computer which has the i.LINK connector by transmitting data via your camcorder.
Before operation
Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Press MENU to display the menu settings.
(3) Turn the SEL/PUSH EXEC dial to set A/V t DV OUT in to ON (p. 214).
(4) Start playback on the analog video unit.
(5) Start procedures for capturing images and sound on your computer.
The operation procedures depend on your computer and the software you are using.
For details on how to capture images, refer to the operating instructions of your computer and the software you are using.
S VIDEO | AUDIO/VIDEO |
VCR
OUT |
| i.LINK | |
| DV | ||
S VIDEO | Yellow | ||
| |||
VIDEO |
| i.LINK cable | |
|
| ||
AUDIO |
| (optional) | |
| A/V connecting | ||
| White | ||
| cable (supplied) | ||
| Red | is marked on | |
: Signal flow |
| this side. | |
|
|
Stop capturing procedures on your computer, and stop playback on the analog video unit.
208