Connecting your camcorder to your computer using the USB cable

6Turn the POWER switch to OFF (CHG) on your camcorder, and then disconnect the USB cable.

7Restart your computer.

Step 2: Install the USB driver on the supplied CD-ROM

Perform the entire procedure described in “Installing the USB driver” on page 189.

Viewing images recorded on a “Memory Stick”

Step 1: Uninstall the incorrect USB driver

1Turn on your computer and allow Windows to load.

2 Insert a “Memory Stick” into your camcorder.

3 Connect the AC Adaptor, and set the POWER switch to MEMORY.

4 Connect the (USB) jack on your camcorder to the USB connector on your computer using the supplied USB cable.

5 Open your computer’s “Device Manager.”

Windows XP:

Select “Start” t “Control Panel” t “System” t “Hardware” tab and click the “Device Manager” button.

If there is no “System” inside “Pick a category” after clicking “Control Panel,” click “Switch to classic view” instead.

Windows 2000:

Select “My Computer” t “Control Panel” t “System” t “Hardware” tab, and click the “Device Manager” button.

Other OS:

Select “My Computer” t “Control Panel” t “System,” and click “Device Manager.”

6 Select “Other devices.”

Select the device prefixed with the “?” mark and delete. Ex: (?)Sony Handycam

7 Turn the POWER switch to OFF (CHG) on your camcorder, and then disconnect the USB cable.

8 Restart your computer.

Step 2: Install the USB driver on the supplied CD-ROM

Perform the entire procedure described in “Installing the USB driver” on page 189.

196