Recording a picture

Using the zoom feature

Set the POWER switch to CAMERA or MEMORY.*

Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom. Using the zoom function sparingly results in better-looking recordings.

“T” side: for telephoto (subject appears closer)

“W” side: for wide-angle (subject appears farther away)

W T

W TW T

To use zoom greater than 20⋅

Zoom greater than 20⋅ is performed digitally. To activate digital zoom, select the digital zoom power in D ZOOM in the menu settings. The digital zoom function is set to OFF as a default setting (p. 212).

The right side of the bar shows the digital

 

 

 

 

 

 

 

W

 

 

 

T

 

 

 

 

 

 

zooming zone.

 

 

 

 

 

 

 

 

 

 

 

 

 

The digital zooming zone appears when you

 

 

 

 

 

 

 

select the digital zoom power in the menu

 

 

 

 

 

 

 

settings.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes on digital zoom

•Digital zoom power can be set to 40⋅ or 700⋅ .

•Digital zoom power can be set to 40⋅ or 560⋅ .

•The picture quality deteriorates as you move the power zoom lever towards the “T” side.

When you shoot close to a subject

If you cannot get a sharp focus, move the power zoom lever to the “W” side until the focus is sharp. You can shoot a subject that is at least about 80 cm (about 2 feet 5/8 inch) away from the lens surface in the telephoto position, or about 1 cm (about 1/2 inch) away in the wide-angle position.

* Modes on the POWER switch vary depending on models (p. 16).

34