Dubbing a tape
Using the i.LINK cableSimply connect the i.LINK cable (optional) to DV on your camcorder and to DV IN on the DV products. With a
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder.
(2) Set the input selector on the VCR to DV IN if it is available. Refer to the operating instructions of your VCR.
(3) Set the POWER switch to VCR on your camcorder.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR.
VCR
| DV |
DV | DV IN |
|
i.LINK cable
is marked on(optional) this side.
: Signal flow
96