Checking recordings – END SEARCH
– EDITSEARCH
– Rec Review
You can use these buttons to check the recorded picture for making the transition between the last recorded scene and the next scene you record smooth.
END SEARCH
EDITSEARCH
Basics – Recording
You can go to the end of the recorded section after you record.
In the standby mode, press END SEARCH.
The last five seconds of the recorded section are played back and your camcorder returns to the standby mode. You can monitor the sound from the speaker.
EDITSEARCHYou can search for the next recording start point.
In the standby mode, hold down the either side of EDITSEARCH. The recorded portion is played back.
+ : To go forward
–7 : To go backward
Release EDITSEARCH to stop playback. If you press START/STOP,
You can check the last recorded section.
In the standby mode, press the – 7 side of EDITSEARCH momentarily.
The section you have stopped most recently will be played back for a few seconds, and then your camcorder will return to the standby mode. You can monitor the sound from the speaker.
43