Changing the menu settings

 

 

 

 

 

 

 

 

 

 

 

 

 

POWER

Icon/item

Mode

Meaning

 

switch *1)

VCR SET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAYER SET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PB MODE *6)

zAUTO

To automatically select the system (Hi8

 

 

 

 

/

VCR

 

 

 

 

 

 

 

 

 

 

 

standard 8 mm or Digital8 ) that was used

 

 

 

 

 

 

to record on the tape, and play back the tape.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/

To play back a tape that was recorded in the

 

 

 

 

 

 

 

 

 

 

 

 

Hi8

 

/standard 8 mm system when your

 

 

 

 

 

 

 

 

 

 

 

 

 

camcorder does not automatically distinguish

 

 

 

 

 

 

the recording system.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After five minutes of removing the power source

The HiFi SOUND *2), EDIT *3) and AUDIO MIX *2) items are returned to their default settings.

Notes on AUDIO MIX *2)

•You can adjust the balance only for tapes recorded in the Digital8 system.

•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.

Note on PB MODE *6)

The mode will return to the default setting when:

–you remove the power source.

–you turn the POWER switch.

*1) Modes on the POWER switch vary depending on models (p. 16).

*2) *3) *4)

*5) When you play back tapes recorded in the Hi8 /standard 8 mmsystem only

*6)

Camcorder Your Customizing

215