Getting ready
The steps necessary to prepare the unit for use differ, depending on whether a wireless LAN or a network cable is used to connect to the computer.
1. Prepare the remote control for use | c Page 15 |
The remote control is necessary for operating of the Network Media Receiver.
2. Connect the Network Media Receiver to a TV | c Page 18 |
Select a suitable connector and cable according to the requirements of the TV monitor. It is also possible to make the connection to the TV via a VCR.
3. Connect the Network Media Receiver to computer via a network cable c Page 21
Connect the Network Media Receiver to the computer using a network cable. When using a wireless connection, this step is not required.
4. Connect power | c Page 29 |
Connect the supplied AC adapter to the Network Media Receiver to supply power.
5. Configure wireless LAN settings | c Page 30 |
When the Network Media Receiver is to be connected to the computer via a wireless connection, without using a network cable, several wireless LAN settings must be configured. When using a network cable connection, this step is not required.
6. Change the settings of the Network Media Receiver to match the
network connection | c Page 33 |
Depending on the network environment, some settings of the Network Media Receiver may have to be changed, setting whether to obtain an IP address automatically or use a fixed address. The default setting is “Automatic assignment (using router)”.
7. Configure settings at the computer | c Page 35 |
The computer must be configured to share its photos, video, and music. When using a VAIO computer, the VAIO Media software must be configured.
When using a different kind of computer, corresponding settings must be configured.
14