Cannot register the Network Media Receiver at the computer
cCheck whether the network connections are established correctly. Check the following items:
•If the Network Media Receiver is connected directly to a single computer, is the crossover cable being used? (page 27)
•Are the hub and router receiving power? (For details, see the manual of the respective device.)
•Was the router turned on before the Network Media Receiver was turned on? (page 38)
•Are the Network Media Receiver and the hub or router connected correctly with network cables? (page 25)
•Is the IP address allocation method for the Network Media Receiver selected correctly for the network environment? (page 34)
Computer does not show up on “Select a server...” screen
cPress the OPTIONS button on the remote control, select “Refresh”, and press the SELECT button (page 40). It may take some time for the computer name to appear in the list.
cVerify that the server software has been started on the computer. Start the software as appropriate for your computer.
If you are using VAIO Media, refer to the VAIO Media Help.
cFor
Can no longer connect to a computer after performing a hard
disk drive recovery on the computer
cPerform the steps in “7 Configure settings at the computer” (page 35) again.
68