Turn power on

Turn on the computer, the TV set, and the Network Media Receiver, and bring up the video output from the Network Media Receiver on the TV screen.

To use the Network Media Receiver, the computer must be started up, the TV set must be switched on, and the TV must be set to the input to which the Network Media Receiver is connected.

1If the Network Media Receiver is connected to a hub or a router with built-in hub, turn on the hub or router.

2Turn on the computer.

3Press the TV POWER button on the remote control to turn on the TV set.

4Use the TV/VIDEO button on the remote control to select the input to which the Network Media Receiver is connected.

5Press the Network Media Receiver POWER button on the remote control to turn on the Network Media Receiver.

The standby indicator changes to green, and the “Select a server...” screen appears on the TV.

“Select a server...” screen

Select a server•••

ServerA-VAIO Media-

Server other than DLNA

ServerB

ServerC

ServerD

1/5

SELECT :Select OPTIONS :System Settings

For details on using the “Select a server...” screen, see page 39.

zHint

You can start the server computer automatically when the Network Media Receiver is turned on by configuring the settings described in “Having the computer start up automatically” on page 52.

Note

For about 20 seconds after the power cord is connected, the Network Media Receiver cannot be turned on. Verify that the standby indicator is lit red before pressing the Network Media Receiver POWER button.

38