6Change the settings of the Network Media Receiver to match the network connection

The factory default setting of the Network Media Receiver is “Automatic assignment (using router)”. Depending on your system environment, this setting may have to be changed.

If a router is being used, there is no need to change the setting.

Use the screens displayed on your TV to configure the network setting.

See page 12 for the location of buttons on the remote control, and page 15 for remote control operations.

1Press the TV POWER button on the remote control to turn on the TV set.

2Use the TV/VIDEO button on the remote control to set the TV to display the signal from the input to which the Network Media Receiver is connected.

3Press the Network Media Receiver POWER button to turn the Network Media Receiver on.

The standby indicator changes to green, and the “Select a server...” screen appears on the TV.

Select a server•••

SELECT :Select OPTIONS :System Settings

4Press the OPTIONS button on the remote control.

The OPTIONS menu appears.

Setup

33