Case 2: Connecting via a hub (system environment B)

 

ADSL modem, cable modem, or

LAN

LINE similar without router capability 1

 

(third-party)

 

Hub 2 (third-party)

Network cable

 

(not supplied)

Network cable

 

(supplied)

To NETWORK

To NETWORK

connector

connector

Computer 1

 

 

Network Media Receiver

To NETWORK

Network cable

connector

(not supplied)

 

Computer 2

1Depending on the respective system connection environment, the connection may be different. For details, contact the technical support department of your Internet provider.

2Use a router with built-in hub that supports 100BASE-TX. All the networked equipment must support 100BASE-TX for optimum playback experience.

Notes

•Use a router with a built-in hub (or stand-alone hub) that supports 100BASE-TX.

•Use network cables that support 100BASE-TX.

•The default setting of the Network Media Receiver is “Automatic assignment (using router)”. Depending on your system environment, this setting may have to be changed. For information on how to do this, see page 33.

zHint

As shown on the previous page and in the illustration above, multiple computers can be connected.

26