1 Prepare the remote control for use
Inserting the batteries
As shown in the illustration, open the battery cover lid of the remote control, and insert two size AA (R6) batteries (supplied).
Verify e/E polarity, and insert the batteries from the E side.
Using the remote control
To use the remote control, point it towards the remote control sensor on the Network Media Receiver, and press the appropriate buttons.
Remote control sensor
zHints
•If the operating range of the remote control decreases, replace both batteries with fresh ones.
•After replacing the batteries, the TV manufacturer code (pages 16, 17) must be set again.
Setup
15