Sony VGP-MR100 Settings available on the “System Settings” screen, To update the firmware

Settings available on the “System Settings” screen

The “System Settings” screen offers the following settings:

Setting			Setting method	Default setting
			reference page
TV Type		56		Standard Definition TV
Network Settings						—
	• Network Type	30		Wired LAN
	• IP Address	34		Automatic assignment (using
				router)
	• Wireless LAN Configurations	30				—
Playback Preference		57		High compatiblity mode
Firmware Update			this page			—
Default Settings		56				—
System Information			—			—
Language Settings		57			English

Note

If you select “High Definition TV”, the screen may go blank on some TV sets. If this happens, disconnect the power cord of the Network Media Receiver, reconnect it, and turn on the Network Media Receiver again.

To update the firmware

Visit the Web site listed in “Getting Help” (page 63) to update your Network Media Receiver to the latest version and download any problem-solving firmware updates. For information on firmware update procedures, refer to the instructions that accompany the downloaded tools. To get the most out of this product, periodically visit the Web site and update the firmware of the Network Media Receiver.

Notes

•During the update process, never disconnect the power cord or the network cable.

•After the update is complete, all settings except for the IP address return to the default settings.

Features Advanced

55