Lexmark 301, Pro900, 30E, 4444 Wi-Fi indicator light is not lit, d Click Advanced TCP/IP or TCP/IP

cClick AirPort.

dClick Advanced > TCP/IP or TCP/IP.

The “Router” entry is typically the wireless access point.

2Type your user name and password when prompted.

3Click OK.

4On the main page, click Wireless or another selection where settings are stored. The SSID will be displayed.

5Write down the SSID, security type and the WEP key/WPA passphrase (if shown).

Notes:

•Make sure you copy the network information down exactly, including any capital letters.

•Store the SSID and the WEP key or WPA passphrase in a safe place for future reference.

MAKE SURE YOUR OS IS COMPATIBLE WITH WIRELESS PRINTING THROUGH AIRPORT

The printer only supports wireless printing through AirPort base stations for Mac OS X 10.5 or later.

Wi-Fi indicator light is not lit

CHECK POWER

If the Wi-Fi indictor light is off, make sure the light is on. If the light is not on, check the following:

•Make sure the printer is plugged in and turned on.

•Make sure the printer is plugged into a working outlet.

•If the printer is plugged into a power strip, make sure it is turned on and working.

Wi-Fi indicator light is green but the printer does not print (Windows only)

If you have completed the configuration for wireless printing and all of the settings appear to be correct, but the printer does not print, then try one or more of the following:

ALLOW THE WIRELESS INSTALLATION TO COMPLETE

Do not attempt to print, remove the installation CD, or detach the installation cable until you see the Wireless Setup Successful screen.

ENABLE THE PRINTER

Confirm that the printer is enabled:

1Click , or click Start and then click Run.

2In the Start Search or Run box, type control printers.

3Press Enter, or click OK. The printer folder opens.

4Right-click the new printer; from the menu, select Use Printer Online.

5Close the Printers or Printers and Faxes window and try printing again.

Troubleshooting

162